Boost your Grades with us today!

Please see below and contactAnswers 1Bids 1Other questions 10

Please see below and contactAnswers 1Bids 1Other questions 10.

Exercise 14Understanding Simple Linear RegressionStatistical Technique in ReviewIn nursing practice, the ability to predict future events or outcomes is crucial, and researchers calculate and report linear regression results as a basis for making these predictions. Linear regression provides a means to estimate or predict the value of a dependent variable based on the value of one or more independent variables. The regression equation is a mathematical expression of a causal proposition emerging from a theoretical framework. The linkage between the theoretical statement and the equation is made prior to data collection and analysis. Linear regression is a statistical method of estimating the expected value of one variable, y, given the value of another variable, x. The focus of this exercise is simple linear regression, which involves the use of one independent variable, x, to predict one dependent variable, y.The regression line developed from simple linear regression is usually plotted on a graph, with the horizontal axis representing x (the independent or predictor variable) and the vertical axis representing the y (the dependent or predicted variable; see Figure 14-1). The value represented by the letter a is referred to as the y intercept, or the point where the regression line crosses or intercepts the y-axis. At this point on the regression line, x = 0. The value represented by the letter b is referred to as the slope, or the coefficient of x. The slope determines the direction and angle of the regression line within the graph. The slope expresses the extent to which y changes for every one-unit change in x. The score on variable y (dependent variable) is predicted from the subject’s known score on variable x (independent variable). The predicted score or estimate is referred to as Ŷ (expressed as y-hat) (Cohen, 1988; Grove, Burns, & Gray, 2013; Zar, 2010).FIGURE 14-1  GRAPH OF A SIMPLE LINEAR REGRESSION LINE140Simple linear regression is an effort to explain the dynamics within a scatterplot (see Exercise 11) by drawing a straight line through the plotted scores. No single regression line can be used to predict, with complete accuracy, every y value from every x value. However, the purpose of the regression equation is to develop the line to allow the highest degree of prediction possible, the line of best fit. The procedure for developing the line of best fit is the method of least squares. If the data were perfectly correlated, all data points would fall along the straight line or line of best fit. However, not all data points fall on the line of best fit in studies, but the line of best fit provides the best equation for the values of y to be predicted by locating the intersection of points on the line for any given value of x.The algebraic equation for the regression line of best fit is y = bx + a, where_y=dependentvariable(outcome) x=independentvariable(predictor) b=slopeoftheline(beta,orwhattheincreaseinvalueisalongthex-axisforeveryunitofincreaseintheyvalue),alsocalledtheregressioncoefficient.  a=y−intercept(thepointwheretheregressionlineintersectsthe y-axis),alsocalledtheregressionconstant(Zar,2010).  In Figure 14-2, the x-axis represents Gestational Age in weeks and the y-axis represents Birth Weight in grams. As gestational age increases from 20 weeks to 34 weeks, birth weight also increases. In other words, the slope of the line is positive. This line of best fit can be used to predict the birth weight (dependent variable) for an infant based on his or her gestational age in weeks (independent variable). Figure 14-2 is an example of a line of best fit that was not developed from research data. In addition, the x-axis was started at 22 weeks rather than 0, which is the usual start in a regression figure. Using the formula y = bx + a, the birth weight of a baby born at 28 weeks of gestation is calculated below.Formula:y=bx+a Inthisexample,a=500,b=20,andx=28weeks y=20(28)+500=560+500=1,060grams FIGURE 14-2  EXAMPLE LINE OF BEST FIT FOR GESTATIONAL AGE AND BIRTH WEIGHT141The regression line represents y for any given value of x. As you can see, some data points fall above the line, and some fall below the line. If we substitute any x value in the regression equation and solve for y, we will obtain a ŷ that will be somewhat different from the actual values. The distance between the ŷ and the actual value of y is called residual, and this represents the degree of error in the regression line. The regression line or the line of best fit for the data points is the unique line that will minimize error and yield the smallest residual (Zar, 2010). The step-by-step process for calculating simple linear regression in a study is presented in Exercise 29.Research ArticleSourceFlannigan, C., Bourke, T. W., Sproule, A., Stevenson, M., & Terris, M. (2014). Are APLS formulae for estimating weight appropriate for use in children admitted to PICU? Resuscitation, 85(7), 927–931.IntroductionMedications and other therapies often necessitate knowing a patient’s weight. However, a child may be admitted to a pediatric intensive care unit (PICU) without a known weight, and instability and on-going resuscitation may prevent obtaining this needed weight. Clinicians would benefit from a tool that could accurately estimate a patient’s weight when such information is unavailable. Thus Flannigan et al. (2014) conducted a retrospective observational study for the purpose of determining “if the revised APLS UK [Advanced Paediatric Life Support United Kingdom] formulae for estimating weight are appropriate for use in the paediatric care population in the United Kingdom” (Flannigan et al., 2014, p. 927). The sample included 10,081 children (5,622 males and 4,459 females), who ranged from term-corrected age to 15 years of age, admitted to the PICU during a 5-year period. Because this was a retrospective study, no geographic location, race, and ethnicity data were collected for the sample. A paired samples t-test was used to compare mean sample weights with the APLS UK formula weight. The “APLS UK formula ‘weight = (0.05 × age in months) + 4’ significantly overestimates the mean weight of children under 1 year admitted to PICU by between 10% [and] 25.4%” (Flannigan et al., 2014, p. 928). Therefore, the researchers concluded that the APLS UK formulas were not appropriate for estimating the weight of children admitted to the PICU.Relevant Study Results“Simple linear regression was used to produce novel formulae for the prediction of the mean weight specifically for the PICU population” (Flannigan et al., 2014, p. 927). The three novel formulas are presented in Figures 1, 2, and 3, respectively. The new formulas calculations are more complex than the APLS UK formulas. “Although a good estimate of mean weight can be obtained by our newly derived formula, reliance on mean weight alone will still result in significant error as the weights of children admitted to PICU in each age and sex [gender] group have a large standard deviation . . . Therefore as soon as possible after admission a weight should be obtained, e.g., using a weight bed” (Flannigan et al., 2014, p. 929).FIGURE 1  Comparison of actual weight with weight calculated using APLS formula “Weight in kg = (0.5 × age in months) + 4” and novel formula “Weight in kg = (0.502 × age in months) + 3.161” Flannigan, C., Bourke, T. W., Sproule, A., Stevenson, M., & Terris, M. (2014). Are APLS formulae for estimating weight appropriate for use in children admitted to PICU? Resuscitation, 85(7), p. 928.FIGURE 2  Comparison of actual weight with weight calculated using APLS formula “Weight in kg = (2 × age in years) + 8” and novel formula “Weight in kg = (0.176 × age in months) + 7.241” Flannigan, C., Bourke, T. W., Sproule, A., Stevenson, M., & Terris, M. (2014). Are APLS formulae for estimating weight appropriate for use in children admitted to PICU? Resuscitation, 85(7), p. 928.FIGURE 3  Comparison of actual weight with weight calculated using APLS formula “Weight in kg = (3 × age in years) + 7” and novel formula “Weight in kg = (0.331 × age in months) − 6.868” Flannigan, C., Bourke, T. W., Sproule, A., Stevenson, M., & Terris, M. (2014). Are APLS formulae for estimating weight appropriate for use in children admitted to PICU? Resuscitation, 85(7), p. 929.  144Study Questions1. What are the variables on the x- and y-axes in Figure 1 from the Flannigan et al. (2014) study?2. What is the name of the type of variable represented by x and y in Figure 1? Is x or y the score to be predicted?3. What is the purpose of simple linear regression analysis and the regression equation?4. What is the point where the regression line meets the y-axis called? Is there more than one term for this point and what is the value of x at that point?5. In the formula y = bx + a, is a or b the slope? What does the slope represent in regression analysis?6. Using the values a = 3.161 and b = 0.502 with the novel formula in Figure 1, what is the predicted weight in kilograms for a child at 5 months of age? Show your calculations.1457. What are the variables on the x-axis and the y-axis in Figures 2 and 3? Describe these variables and how they might be entered into the regression novel formulas identified in Figures 2 and 3.8. Using the values a = 7.241 and b = 0.176 with the novel formula in Figure 2, what is the predicted weight in kilograms for a child at 4 years of age? Show your calculations.9. Does Figure 1 have a positive or negative slope? Provide a rationale for your answer. Discuss the meaning of the slope of Figure 1.10. According to the study narrative, why are estimated child weights important in a pediatric intensive care (PICU) setting? What are the implications of these findings for practice?146Answers to Study Questions1. The x variable is age in months, and the y variable is weight in kilograms in Figure 1.2. x is the independent or predictor variable. y is the dependent variable or the variable that is to be predicted by the independent variable, x.3. Simple linear regression is conducted to estimate or predict the values of one dependent variable based on the values of one independent variable. Regression analysis is used to calculate a line of best fit based on the relationship between the independent variable x and the dependent variable y. The formula developed with regression analysis can be used to predict the dependent variable (y) values based on values of the independent variable x.4. The point where the regression line meets the y-axis is called the y intercept and is also represented by a (see Figure 14-1). a is also called the regression constant. At the y intercept, x = 0.5. b is the slope of the line of best fit (see Figure 14-1). The slope of the line indicates the amount of change in y for each one unit of change in x. b is also called the regression coefficient.6. Use the following formula to calculate your answer: y = bx + ay = 0.502 (5) + 3.161 = 2.51 + 3.161 = 5.671 kilogramsNote: Flannigan et al. (2014) expressed the novel formula of weight in kilograms = (0.502 × age in months) + 3.161 in the title of Figure 1.7. Age in years is displayed on the x-axis and is used for the APLS UK formulas in Figures 2 and 3. Figure 2 includes children 1 to 5 years of age, and Figure 3 includes children 6 to 12 years of age. However, the novel formulas developed by simple linear regression are calculated with age in months. Therefore, the age in years must be converted to age in months before calculating the y values with the novel formulas provided for Figures 2 and 3. For example, a child who is 2 years old would be converted to 24 months (2 × 12 mos./year = 24 mos.). Then the formulas in Figures 2 and 3 could be used to predict y (weight in kilograms) for the different aged children. The y-axis on both Figures 2 and 3 is weight in kilograms (kg).8. First calculate the child’s age in months, which is 4 × 12 months/year = 48 months.y = bx + a = 0.176 (48) + 7.241 = 8.448 + 7.241 = 15.689 kilogramsNote the x value needs to be in age in months and Flannigan et al. (2014) expressed the novel formula of weight in kilograms = (0.176 × age in months) + 7.241.1479. Figure 1 has a positive slope since the line extends from the lower left corner to the upper right corner and shows a positive relationship. This line shows that the increase in x (independent variable) is associated with an increase in y (dependent variable). In the Flannigan et al. (2014) study, the independent variable age in months is used to predict the dependent variable of weight in kilograms. As the age in months increases, the weight in kilograms also increases, which is the positive relationship illustrated in Figure 1.10. According to Flannigan et al. (2014, p. 927), “The gold standard for prescribing therapies to children admitted to Paediatric Intensive Care Units (PICU) requires accurate measurement of the patient’s weight. . . . An accurate weight may not be obtainable immediately because of instability and on-going resuscitation. An accurate tool to aid the critical care team estimate the weight of these children would be a valuable clinical tool.” Accurate patient weights are an important factor in preventing medication errors particularly in pediatric populations. The American Academy of Pediatrics (AAP)’s policy on Prevention of Medication Errors in the Pediatric Inpatient Setting can be obtained from the following website: https://www.aap.org/en-us/advocacy-and-policy/federal-advocacy/Pages/Federal-Advocacy.aspx#SafeandEffectiveDrugsandDevicesforChildren. The Centers for Medicare & Medicaid Services, Partnership for Patients provides multiple links to Adverse Drug Event (ADE) information including some resources specific to pediatrics at http://partnershipforpatients.cms.gov/p4p_resources/tsp-adversedrugevents/tooladversedrugeventsade.html. 149EXERCISE 14 Questions to Be GradedFollow your instructor’s directions to submit your answers to the following questions for grading. Your instructor may ask you to write your answers below and submit them as a hard copy for grading. Alternatively, your instructor may ask you to use the space below for notes and submit your answers online at http://evolve.elsevier.com/Grove/Statistics/ under “Questions to Be Graded.”Name: _______________________________________________________ Class: _____________________Date: ___________________________________________________________________________________1. According to the study narrative and Figure 1 in the Flannigan et al. (2014) study, does the APLS UK formula under- or overestimate the weight of children younger than 1 year of age? Provide a rationale for your answer.2. Using the values a = 3.161 and b = 0.502 with the novel formula in Figure 1, what is the predicted weight in kilograms (kg) for a child at 9 months of age? Show your calculations.3. Using the values a = 3.161 and b = 0.502 with the novel formula in Figure 1, what is the predicted weight in kilograms for a child at 2 months of age? Show your calculations.4. In Figure 2, the formula for calculating y (weight in kg) is Weight in kg = (0.176 × Age in months) + 7.241. Identify the y intercept and the slope in this formula.1505. Using the values a = 7.241 and b = 0.176 with the novel formula in Figure 2, what is the predicted weight in kilograms for a child 3 years of age? Show your calculations.6. Using the values a = 7.241 and b = 0.176 with the novel formula in Figure 2, what is the predicted weight in kilograms for a child 5 years of age? Show your calculations.7. In Figure 3, some of the actual mean weights represented by blue line with squares are above the dotted straight line for the novel formula, but others are below the straight line. Is this an expected finding? Provide a rationale for your answer.8. In Figure 3, the novel formula is (weight in kilograms = (0.331 × Age in months) − 6.868. What is the predicted weight in kilograms for a child 10 years old? Show your calculations.9. Was the sample size of this study adequate for conducting simple linear regression? Provide a rationale for your answer.10. Describe one potential clinical advantage and one potential clinical problem with using the three novel formulas presented in Figures 1, 2, and 3 in a PICU setting.(Grove 139-150)Grove, Susan K., Daisha Cipher. Statistics for Nursing Research: A Workbook for Evidence-Based Practice, 2nd Edition. Saunders, 022016. VitalBook file.The citation provided is a guideline. Please check each citation for accuracy before use. Exercise 19Understanding Pearson Chi-SquareStatistical Technique in ReviewThe Pearson Chi-square (χ2 ) is an inferential statistical test calculated to examine differences among groups with variables measured at the nominal level. There are different types of χ2 tests and the Pearson chi-square is commonly reported in nursing studies. The Pearson χ2 test compares the frequencies that are observed with the frequencies that were expected. The assumptions for the χ2 test are as follows:1. The data are nominal-level or frequency data.2. The sample size is adequate.3. The measures are independent of each other or that a subject’s data only fit into one category (Plichta & Kelvin, 2013).The χ2 values calculated are compared with the critical values in the χ2 table (see Appendix D Critical Values of the χ2 Distribution at the back of this text). If the result is greater than or equal to the value in the table, significant differences exist. If the values are statistically significant, the null hypothesis is rejected (Grove, Burns, & Gray, 2013). These results indicate that the differences are probably an actual reflection of reality and not just due to random sampling error or chance.In addition to the χ2 value, researchers often report the degrees of freedom (df). This mathematically complex statistical concept is important for calculating and determining levels of significance. The standard formula for df is sample size (N) minus 1, or df = N − 1; however, this formula is adjusted based on the analysis technique performed (Plichta & Kelvin, 2013). The df formula for the χ2 test varies based on the number of categories examined in the analysis. The formula for df for the two-way χ2 test is df = (R − 1) (C − 1), where R is number of rows and C is the number of columns in a χ2 table. For example, in a 2 × 2 χ2 table, df = (2 − 1) (2 − 1) = 1. Therefore, the df is equal to 1. Table 19-1 includes a 2 × 2 chi-square contingency table based on the findings of An et al. (2014) study. In Table 19-1, the rows represent the two nominal categories of alcohol 192use and alcohol nonuse and the two columns represent the two nominal categories of smokers and nonsmokers. The df = (2 − 1) (2 − 1) = (1) (1) = 1, and the study results were as follows: χ2 (1, N = 799) = 63.1; p < 0.0001. It is important to note that the df can also be reported without the sample size, as in χ2(1) = 63.1, p < 0.0001.TABLE 19-1CONTINGENCY TABLE BASED ON THE RESULTS OF AN ET AL. (2014) STUDY Nonsmokers n = 742Smokers n = 57*No alcohol use55114Alcohol use†19143*Smokers defined as “smoking at least 1 cigarette daily during the past month.”†Alcohol use “defined as at least 1 alcoholic beverage per month during the past year.”An, F. R., Xiang, Y. T., Yu., L., Ding, Y. M., Ungvari, G. S., Chan, S. W. C., et al. (2014). Prevalence of nurses' smoking habits in psychiatric and general hospitals in China. Archives of Psychiatric Nursing, 28(2), 120.If more than two groups are being examined, χ2 does not determine where the differences lie; it only determines that a statistically significant difference exists. A post hoc analysis will determine the location of the difference. χ2 is one of the weaker statistical tests used, and results are usually only reported if statistically significant values are found. The step-by-step process for calculating the Pearson chi-square test is presented in Exercise 35.Research ArticleSourceDarling-Fisher, C. S., Salerno, J., Dahlem, C. H. Y., & Martyn, K. K. (2014). The Rapid Assessment for Adolescent Preventive Services (RAAPS): Providers' assessment of its usefulness in their clinical practice settings. Journal of Pediatric Health Care, 28(3), 217–226.IntroductionDarling-Fisher and colleagues (2014, p. 219) conducted a mixed-methods descriptive study to evaluate the clinical usefulness of the Rapid Assessment for Adolescent Preventative Services (RAAPS) screening tool “by surveying healthcare providers from a wide variety of clinical settings and geographic locations.” The study participants were recruited from the RAAPS website to complete an online survey. The RAAPS risk-screening tool “was developed to identify the risk behaviors contributing most to adolescent morbidity, mortality, and social problems, and to provide a more streamlined assessment to help providers address key adolescent risk behaviors in a time-efficient and user-friendly format” (Darling-Fisher et al., 2014, p. 218). The RAAPS is an established 21-item questionnaire with evidence of reliability and validity that can be completed by adolescents in 5–7 minutes.“Quantitative and qualitative analyses indicated the RAAPS facilitated identification of risk behaviors and risk discussions and provided efficient and consistent assessments; 86% of providers believed that the RAAPS positively influenced their practice” (Darling-Fisher et al., 2014, p. 217). The researchers concluded the use of RAAPS by healthcare providers could improve the assessment and identification of adolescents at risk and lead to the delivery of more effective adolescent preventive services.Relevant Study ResultsIn the Darling-Fisher et al. (2014, p. 220) mixed-methods study, the participants (N = 201) were “providers from 26 U.S. states and three foreign countries (Canada, Korea, and Ireland).” More than half of the participants (n = 111; 55%) reported they were using the RAAPS in their clinical practices. “When asked if they would recommend the RAAPS to other providers, 86 responded, and 98% (n = 84) stated they would recommend RAAPS. The two most common reasons cited for their recommendation were for screening (n = 76, 92%) and identification of risk behaviors (n = 75, 90%). Improved communication (n = 52, 63%) and improved documentation (n = 46, 55%) and increased patient understanding of their risk behaviors (n = 48, 58%) were also cited by respondents as reasons to recommend the RAAPS” (Darling-Fisher et al., 2014, p. 222).193“Respondents who were not using the RAAPS (n = 90; 45%), had a variety of reasons for not using it. Most reasons were related to constraints of their health system or practice site; other reasons were satisfaction with their current method of assessment . . . and that they were interested in the RAAPS for academic or research purposes rather than clinical use” (Darling-Fisher et al., 2014, p. 220).Chi-square analysis was calculated to determine if any statistically significant differences existed between the characteristics of the RAAPS users and nonusers. Darling-Fisher et al. (2014) did not provide a level of significance or α for their study, but the standard for nursing studies is α = 0.05. “Statistically significant differences were noted between RAAPS users and nonusers with respect to provider types, practice setting, percent of adolescent patients, years in practice, and practice region. No statistically significant demographic differences were found between RAAPS users and nonusers with respect to race, age” (Darling-Fisher et al., 2014, p. 221). The χ2 results are presented in Table 2.TABLE 2DEMOGRAPHIC COMPARISONS BETWEEN RAPID ASSESSMENT FOR ADOLESCENT PREVENTIVE SERVICE USERS AND NONUSERSCurrent userYes (%)No (%)χ2pProvider type (n = 161)  12.7652, df = 2< .00 Health care provider64 (75.3)55 (72.4) Mental health provider13 (15.3)2 (2.6) Other8 (9.4)19 (25.0)Practice setting (n = 152)  12.7652, df = 150%59 (69.4)33 (47.8)Years in practice (n = 157)  6.2597, df = 1.01 ≤5 years44 (51.8)23 (31.9) >5 years41 (48.2)49 (68.1)U.S. practice region (n = 151)  29.68, df = 3< .00 Northeastern United States13 (15.3)15 (22.7) Southern United States11 (12.9)22 (33.3) Midwestern United States57 (67.1)16 (24.2) Western United States4 (4.7)13 (19.7)Race (n = 201)  1.2865, df = 2.53 Black/African American11 (9.9)5 (5.6) White/Caucasian66 (59.5)56 (62.2) Other34 (30.6)29 (32.2)Provider age in years (n = 145)  4.00, df = 2.14 20–39 years21 (25.6)8 (12.7) 40–49 years24 (29.3)19 (30.2) 50+ years37 (45.1)36 (57.1)χ2, Chi-square statistic.df, degrees of freedom.Darling-Fisher, C. S., Salerno, J., Dahlem, C. H. Y., & Martyn, K. K. (2014). The Rapid Assessment for Adolescent Preventive Services (RAAPS): Providers' assessment of its usefulness in their clinical practice settings. Journal of Pediatric Health Care, 28(3), p. 221.194Study Questions1. What is the sample size for the Darling-Fisher et al. (2014) study? How many study participants (percentage) are RAAPS users and how many are RAAPS nonusers?2. What is the chi-square (χ2) value and degrees of freedom (df) for provider type?3. What is the p value for provider type? Is the χ2 value for provider type statistically significant? Provide a rationale for your answer.4. Does a statistically significant χ2 value provide evidence of causation between the variables? Provide a rationale for your answer.5. What is the χ2 value for race? Is the χ2 value statistically significant? Provide a rationale for your answer.6. Is there a statistically significant difference between RAAPS users and RAAPS nonusers with regard to percentage adolescent patients? In your own opinion is this an expected finding? Document your answer.1957. What is the df for U.S. practice region? Complete the df formula for U.S. practice region to visualize how Darling-Fisher et al. (2014) determined the appropriate df for that region.8. State the null hypothesis for the years in practice variable for RAAPS users and RAAPS nonusers.9. Should the null hypothesis for years in practice developed for Question 8 be accepted or rejected? Provide a rationale for your answer.10. How many null hypotheses were accepted by Darling-Fisher et al. (2014) in Table 2? Provide a rationale for your answer.196Answers to Study Questions1. The sample size is N = 201 with n = 111 (55%) RAAPS users and n = 90 (45%) RAAPS nonusers as indicated in the narrative results.2. The χ2 = 12.7652 and df = 2 for provider type as presented in Table 2.3. The p = 5 years of practice.1979. The null hypothesis for years in practice stated in Questions 8 should be rejected. The χ2 = 6.2597 for years in practice is statistically significant, p = .01. A statistically significant χ2 indicates a significant difference exists between the users and nonusers of RAAPS for years in practice; therefore, the null hypothesis should be rejected.10. Two null hypotheses were accepted since two χ2 values (race and provider age) were not statistically significant (p > 0.05), as indicated in Table 2. Nonsignificant results indicate that the null hypotheses are supported or accepted as an accurate reflection of the results of the study. 199EXERCISE 19 Questions to Be GradedFollow your instructor’s directions to submit your answers to the following questions for grading. Your instructor may ask you to write your answers below and submit them as a hard copy for grading. Alternatively, your instructor may ask you to use the space below for notes and submit your answers online at http://evolve.elsevier.com/Grove/Statistics/ under “Questions to Be Graded.”Name: _______________________________________________________ Class: _____________________Date: ___________________________________________________________________________________1. According to the relevant study results section of the Darling-Fisher et al. (2014) study, what categories are reported to be statistically significant?2. What level of measurement is appropriate for calculating the χ2 statistic? Give two examples from Table 2 of demographic variables measured at the level appropriate for χ2.3. What is the χ2 for U.S. practice region? Is the χ2 value statistically significant? Provide a rationale for your answer.4. What is the df for provider type? Provide a rationale for why the df for provider type presented in Table 2 is correct.2005. Is there a statistically significant difference for practice setting between the Rapid Assessment for Adolescent Preventive Services (RAAPS) users and nonusers? Provide a rationale for your answer.6. State the null hypothesis for provider age in years for RAAPS users and RAAPS nonusers.7. Should the null hypothesis for provider age in years developed for Question 6 be accepted or rejected? Provide a rationale for your answer.8. Describe at least one clinical advantage and one clinical challenge of using RAAPS as described by Darling-Fisher et al. (2014).9. How many null hypotheses are rejected in the Darling-Fisher et al. (2014) study for the results presented in Table 2? Provide a rationale for your answer.10. A statistically significant difference is present between RAAPS users and RAAPS nonusers for U.S. practice region, χ2 = 29.68. Does the χ2 result provide the location of the difference? Provide a rationale for your answer(Grove 191-200)Grove, Susan K., Daisha Cipher. Statistics for Nursing Research: A Workbook for Evidence-Based Practice, 2nd Edition. Saunders, 022016. VitalBook file.The citation provided is a guideline. Please check each citation for accuracy before use.  Exercise 29Calculating Simple Linear RegressionSimple linear regression is a procedure that provides an estimate of the value of a dependent v

The post Please see below and contactAnswers 1Bids 1Other questions 10 appeared first on homeworkhandlers.com.

Please see below and contactAnswers 1Bids 1Other questions 10

Solution:

15% off for this assignment.

Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!

Why US?

100% Confidentiality

Information about customers is confidential and never disclosed to third parties.

Timely Delivery

No missed deadlines – 97% of assignments are completed in time.

Original Writing

We complete all papers from scratch. You can get a plagiarism report.

Money Back

If you are convinced that our writer has not followed your requirements, feel free to ask for a refund.

//